View VHHERMETIC_4406458.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

VH Hermetic
Vishay Foil Resistors
Bulk Metal(R) Foil Technology Hermetically Sealed Resistors, Aerospace
FEATURES
* VH102K Series Nominal Temperature Coefficient of Resistance: - 0.3ppm/C (0C to + 25C); + 0.3ppm/C (+ 25C to + 60C); - 1.0ppm/C (- 55C to + 25C); + 1.0ppm/C (+ 25C to + 125C) * VHS102 Series Nominal Temperature Coefficient of Resistance: + 0.6ppm/C (0C to + 25C); - 0.6ppm/C (+ 25C to + 60C); + 2.2ppm/C (- 55C to + 25C); - 1.8ppm/C (+ 25C to + 125C) * VHS555 Temperature Coefficient of Resistance: 5ppm/C (- 55C to + 125C); * Selected TCR Tracking: to 0.5ppm/C (matched sets) * Load-Life Stability: 0.0025% maximum R at 0.1 watt, + 60C, 2,000 hours (VHS555) * Power Rating: 0.6 Watts at + 70C; 0.3 Watts at + 125C * Resistance Tolerance (Initial Resistance Accuracy): 0.005% tightest to 1.0% loosest * Resistance Range: 1 to 150K
Product may not be to scale
The "VH" series of resistors is the hermetic version of several molded "S" series devices. Hermetic sealing eliminates the ingress of both oxygen, which degrades resistors over long periods, and moisture which degrades resistors more quickly. These parts are made with glass to metal seal enclosures employing Kovar eyelets which allow the copper leads to pass through the enclosure to minimize the thermal EMF from the lead junctions. Rubber fill between the metal housing and resistance element acts both as a mechanical damper and thermal transfer path. VHS102 and VH102K are the hermetically-sealed counterpart of the S102C and S102K high-performance molded resistors. VHS555 is the hermetically-sealed version of the S555, MIL style RNC90Y.
THROUGH HOLE
TABLE 1 - MODEL SELECTION
RESISTANCE STANDARD RESISTANCE MAXIMUM AMBIENT RANGE TOLERANCE1 % WORKING POWER RATING3 () TIGHTEST LOOSEST VOLTAGE2 @ + 70C @ + 125C VH102K* 30.1 to 150K 0.005 1.0 20 to < 30.1 0.01 1.0 VHS102 10 to < 20 0.05 1.0 5 to < 10 0.10 1.0 1 to < 5 0.25 1.0 300 0.6 W 0.3 W VHS555 30.1 to 150K 0.005 1.0 16.2 to < 30.1 0.05 1.0 4.99 to < 16.2 0.10 1.0 1 to < 4.99 0.25 1.0 *Available from 1 ohm to 100K only. Contains RNC90Y inside (4.99 ohms to 121 K). Above 100Kohms VHS102 power is derated to 0.4 W @ + 70C and 0.2 W @ + 125C **0.375H available. See the third page in this datasheet for numbered footnotes. MODEL NUMBER AVERAGE WEIGHT (GRAMS) DIMENSIONS INCHES W 0.185 Maximum L 1.4 H 0.435 Maximum mm 4.70 Maximum 11.05 Maximum 25.4 3.18 3.81 0.25 2.41 Maximum
0.430 Maximum** 10.92 Maximum
LL 1 0.125 LS 0.150 0.0104 ST 0.095 Maximum
FIGURE 1 - STANDARD IMPRINTING AND DIMENSIONS
Front View L VISHAY XXXX VHS555 Rear View W 100R01 0.01% XXXX ST Date Code 01 10 Year Week LS Lead Material #22 AWG Round Solder Coated Copper LL Resistance Value Code Tolerance Serial No. (Optional Marking)
H
Model Number
SALES * ISRAEL: foilsales.israel@vishay.com * FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com * AMERICAS: foilsales.usa@vishay.com * ASIA/JAPAN: foilsales.asia@vishay.com * UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com * GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com
For technical questions in the Americas, contact foilsupport1@vishay.com Document Number: 63004 For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com Revision 02-Mar-05
www.vishay.com 77
VH Hermetic
Vishay Foil Resistors
Bulk Metal(R) Foil Technology Hermetically Sealed Resistors, Aerospace
TABLE 2 - "H" SERIES SPECIFICATIONS5
TEMPERATURE COEFFICIENT OF RESISTANCE VH102K Nominal TCR6 (See Fig. 7 and 8 in datasheet "7 Technical Reasons to Specify Vishay Bulk Metal(R) Foil Resistive Components.") Maximum TCR (See Fig. 7 and 8 in datasheet "7 Technical Reasons to Specify Vishay Bulk Metal(R) Foil Resistive Components.") Selected9 TCR Tracking10 (Closest Spread) - 0.3ppm/C (0C to + 25C) + 0.3ppm/C (+ 25 to + 60C) - 1.0ppm/C (- 55C to + 25C) + 1.0ppm/C (+ 25C to + 125C) 2.5ppm/C (0C to + 25C and + 25C to + 60C) 2.5ppm/C (- 55C to + 25C and + 25C to + 125C)
0.5ppm/C + 0.6ppm/C - 0.6ppm/C + 2.2ppm/C - 1.8ppm/C (0C to + 25C) (+ 25C to + 60C) (- 55C to + 25C) (+ 25C to + 125C)
THROUGH HOLE
VHS102 Nominal TCR6 (See Fig. 1 and 2 in datasheet "7 Technical Reasons to Specify Vishay Bulk Metal(R) Foil Resistive Components.") Standard TCR Spread from Nominal7 (See Fig. 5 and 6 in datasheet "7 Technical Reasons to Specify Vishay Bulk Metal(R) Foil Resistive Components.") Maximum TCR Spread from Nominal14 (See Fig. 5 and 6 in datasheet "7 Technical Reasons to Specify Vishay Bulk Metal(R) Foil Resistive Components.") Selected9 TCR Tracking10 VHS555 Nominal TCR6 (See Fig. 1 and 2 in datasheet "7 Technical Reasons to Specify Vishay Bulk Metal(R) Foil Resistive Components.") Standard TCR Spread from Nominal7 (See Fig. 5 and 6 in datasheet "7 Technical Reasons to Specify Vishay Bulk Metal(R) Foil Resistive Components.") Maximum TCR Spread from Nominal8 (See Fig. 5 and 6 in datasheet "7 Technical Reasons to Specify Vishay Bulk Metal(R) Foil Resistive Components.") Selected8 TCR Tracking10 Stability
14
1.5ppm/C (0C to + 25C and + 25C to + 60C) 2.0ppm/C (- 55C to + 25C and + 25C to + 125C) 2.5ppm/C (0C to + 25C and + 25C to + 60C) 2.3ppm/C (- 55C to + 25C and + 25C to + 125C) 0.5ppm/C + 0.6ppm/C - 0.6ppm/C + 2.2ppm/C - 1.8ppm/C (0C to + 25C) (+ 25 to + 60C) (- 55C to + 25C) (+ 25 to + 125C)
1.5ppm/C (0C to + 25C and + 25C to + 60C) 2.0ppm/C (- 55C to + 25C and + 25C to + 125C) 2.5ppm/C (0C to + 25C and + 25C to + 60C) 2.3ppm/C (- 55C to + 25C and + 25C to + 125C) 0.5ppm/C VH102K 0.025% 0.005% 0.02% 5ppm 10ppm VHS102 0.025% 0.005% 0.02% (0.0005%) (0.001%) VHS555 0.015% 0.0025% 0.01%
Load Life at 2,000 hours. Load Life at 10,000 hours. Shelf Life Stability Current Noise High Frequency Operation Rise/Decay Time Inductance (L)11 Capacitance (C) Voltage Coefficient Thermal EMF13 Hermeticity
@ 0.3W/+ 125C @ 0.1W/+ 60C @ 0.05W/+ 125C
Maximum R after 1 year Maximum R after 3 years
< 0.010V (RMS)/Volt of applied voltage (- 40dB) 1.0 ns at 1K 0.1H maximum; 0.08H typical 1.0pF maximum; 0.5pF typical < 0.1ppm/V12 0.1V/C Maximum; 0.05V/C Typical 1V/watt 10-7 Atmospheric cc/sec Maximum
SALES * ISRAEL: foilsales.israel@vishay.com * FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com * AMERICAS: foilsales.usa@vishay.com * ASIA/JAPAN: foilsales.asia@vishay.com * UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com * GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com
www.vishay.com 78
For technical questions in the Americas, contact foilsupport1@vishay.com Document Number: 63004 For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com Revision 02-Mar-05
VH Hermetic
Bulk Metal(R) Foil Technology Vishay Foil Resistors Hermetically Sealed Resistors, Aerospace
NOTES: 1. Standard Resistance Tolerance: 0.005%; 0.01%; 0.02%; 0.05%; 0.1%; 0.25%; 0.5%; 1.0%. 2. Not to exceed power rating of resistor. 3. See Figure 2 below. 4. 0.200" (5.08 mm) lead spacing available (except VHS555)- specify VH102J (S102C type), VH102L (S102K type). 5. Maximum is 1.0% A.Q.L. standard for all specifications except TCR. (For TCR information see notes 6 -10.) Typical is a designers reference which represents that 85% of the units supplied, over a long period of time, will be at least the figure shown or better. 6. Vishay Nominal TCR is defined as the chord slopes of the relative change of resistance/temperature, expressed in ppm (parts per million), called (RT) curve from 0C to + 25C and + 25C to + 60C ("Instrument" Range); and from - 55C to + 25C and + 25C to + 125C ("Military" Range). These specifications and the definition of Nominal TCR apply to all resistance values including low-value resistors. 7. Vishay Standard TCR Spread is defined as a designers reference which represents that at least 92% of the units, and 82% of the lots, supplied by Vishay will be within the stated band centered on the nominal curve. This definition of the Vishay Standard TCR Spread from Nominal applies to all resistance values. However, as the resistance value decreases below 80 ohms, the Vishay Standard TCR Spread from Nominal specification starts to increase. (See Figure 3 in data sheet "7 Technical Reasons to specify BMF Resistive Components.") 8. Vishay Maximum TCR Spread is defined as the 3 (Sigma) limit of a normal Gaussian distribution (99.73% of a production lot) which is within a band, centered on the nominal curve. This Vishay Maximum TCR Spread is no greater than 2.5ppm/C from nominal throughout the full temperature range. This definition of the Vishay Maximum TCR Spread from Nominal applies to all resistance values. However, as the resistance value decreases below 80 ohms, the Vishay maximum TCR Spread from Nominal specification starts to increase. (See Figure 3 in datasheet "7 Technical Reasons to Specify Vishay Bulk Metal(R) Foil Resistive Components.") 9. Selected TCR Tracking is available for specially ordered lots of resistors. The selected TCR tracking can be 3, 2, 1 and as close as 0.5ppm/C throughout the full temperature range. 10. TCR tracking is a measure of the similarity of resistance value change in two or more resistors which are undergoing the same temperature changes. Tracking could be expressed as the difference in the temperature coefficients of the resistors, expressed in ppm/C as (R1/R1 - R2/R2) x 10-6/TC. When a number of resistors are referenced to a nominal TCR, the spread or envelope around the nominal would be the difference. If the spread is 1.5ppm/C about a nominal, the tracking, as defined above, will be 3ppm/C. 11 Inductance (L) due mainly to the leads. 12. The resolution limit of existing test equipment (within the measurement capability of the equipment, or "essentially zero.") 13. V/C relates to EMF due to lead temperature difference and V/watt due to power applied to the resistor. 14. Load life R Maximum can be reduced through burn-in procedure.
THROUGH HOLE
FIGURE 2 - POWER DERATING CURVE
-55C
+70C Double Rated Power
Percent of Rated Power @ +125C
+200 +175 +150 +125 Rated Power +100 +75 +50 +25 0 -75 -50
-25
0
+25 +50
+75 +100 +125 +150 +175 +200
Ambient Temperature (C)
SALES * ISRAEL: foilsales.israel@vishay.com * FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com * AMERICAS: foilsales.usa@vishay.com * ASIA/JAPAN: foilsales.asia@vishay.com * UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com * GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com
For technical questions in the Americas, contact foilsupport1@vishay.com Document Number: 63004 For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com Revision 02-Mar-05
www.vishay.com 79
VH Hermetic
Vishay Foil Resistors
Bulk Metal(R) Foil Technology Hermetically Sealed Resistors, Aerospace
TABLE 3 - ENVIRONMENTAL PERFORMANCE COMPARISON
MIL-PRF-55182/9 CHARACTERISTIC Y MAXIMUM R Test Group I Thermal Shock Overload Test Group II Resistance Temp Char. Temp Storage Low Temp Operation Terminal Strength Test Group III DWV Insulation Resistance Resistance to Solder Heat Moisture Resistance Test Group IV Shock Vibration Test Group V Life Test @ 0.3 W/+ 125C 2,000 Hours 10,000 Hours Test Group Va + 70C Power Rating Test Group VI High Temp Exposure VH102K TYPICAL5 R VHS102 TYPICAL5 R VHS555 TYPICAL5 R
0.05% 0.05%
0.002% 0.003%
0.002% 0.003%
0.002% 0.003%
THROUGH HOLE
5ppm/C 0.05% 0.05% 0.02%
See Figures 7 & 8* 0.005% 0.005% 0.002%
See Figures 1 & 2, and Figures 5 & 6* 0.005% 0.0025 0.005% 0.005% 0.002% 0.002%
0.02% 104M 0.02% 0.05%
0.005% 40 x 105M 0.002% 0.005%
0.005% 40 x 105M 0.002% 0.005%
0.002% 40 x 105M 0.002% 0.005%
0.01% 0.02%
0.002% 0.002%
0.002% 0.002%
0.002% 0.002%
0.05% 0.5%
0.03% 0.05%
0.03% 0.05%
0.01% 0.02%
0.05%
0.02%
0.02%
0.02%
0.05%
0.05%
0.05%
0.04%
Test Group VII Voltage Coefficient 0.0005%/V < 0.00001%/V < 0.00001%/V See previous page for numbered footnotes. *These figures can be found in data sheet "7 Technical Reasons to Specify Bulk Metal(R) Foil Resistive Components."
< 0.00001%/V
TABLE 4 - ORDERING INFORMATION
Please specify Vishay VH102K, VHS102 and VHS555 resistors as follows: (See Imprinting Illustration and Table 1, 1st page in this datasheet, for further details). Example: VHS555 MODEL NO. 100R01 RESISTANCE VALUE 0.01% TOLERANCE
Resistance Value, in ohms, is expressed by a series of 6 characters, 5 of which represent significant digits while the 6th is a dual purpose letter that designates both the multiplier and the location of the comma or decimal. RESISTANCE RANGE** LETTER DESIGNATOR MULTIPLIER FACTOR EXAMPLE 100R01 = 100.01 15K231 = 15,231
1 to < 1K R x1 1K to < 150K K x 103 **Resistance Range limit of 100K for VH102K, 150K for VHS555, 150K for VHS102.
SALES * ISRAEL: foilsales.israel@vishay.com * FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com * AMERICAS: foilsales.usa@vishay.com * ASIA/JAPAN: foilsales.asia@vishay.com * UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com * GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com
www.vishay.com 80
For technical questions in the Americas, contact foilsupport1@vishay.com Document Number: 63004 For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com Revision 02-Mar-05
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of VHHERMETIC

	To Download VHHERMETIC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .